Contattateci

HD-DCS Fanout cables MTP-LCDU, 8 fibres OM4

for splitting 100G into 4x 25G or 40G into 4x 10G

HD-DCS Fanout cables MTP-LCDU, 8 fibres OM4

Specifiche tecniche

Thin, very flexible fibre-optic fanout cable (round cable, Ø 2.0 mm) with 8 fibres.
Low fire load due to its halogen-free flame-retardant LS0H sheath.
Available with 2.5 m standard length (other lengths on request).
Standard connectivity method can be type A or type C.
Sticker labelling at both cable ends.
Breakout seperation is effected with a thin divider housing.
The legs (Ø 2.0 mm) with LCD Uniboot (LCDU) plugs are numbered (1-4).
The legs can be ordered graded in length or of equal length.
Project-specific assemblies are available on request.
HD-DCS Fanout cables (FR/LS0H) with 8 fibres.
High-performance connector assembly with MTP Elite and LCD Uniboot Intelli-Cross Pro.
All connectors incl. push-pull tabs.
Sticker labelling at both cable ends.
Test reports (IL/RL) on all connectors.
Insertion Loss (IL) is determined by the latest measurement methods under EFL multimode excitation conditions (EFL = Encircled Flux Launch) at 850 nm in accordance with IEC 61280-4-1.
MTP-on-LCDU fanout cables are suitable for all high-performance applications in a data centre environment.
All well-known multimode and single-mode QSFP applications such as SR4, PSM4, PLR4 and FCp can be split into four duplex channels using this cable.
The connectivity of this fanout cable splits one 4-channel parallel optic link into four duplex links (e.g. 100G into 4x 25G or 40G into 4x 10G).
The fanout cables are assembled to a very high quality and guarantee optimum values for optical performance (IL/RL).
Propagazione della fiamma IEC 60332-1-2
Standard LC (IEC) IEC 61754-20
Standard MTP (IEC) IEC 61754-7, IEC 61755-3-31, IEC 61755-3-32
Standard di polarità TIA-568-C.3 Type A,B,C
Materiale della guaina esterna FR/LSZH
Colore della guaina esterna heather violet
Tipo di connettore lato A MTP
Finitura della ferrula lato A Elite PC 0°
Connector gender side A female
Colore dell’alloggiamento lato A magenta
Tipo di connettore lato B LCDU
Finitura della ferrula lato B PC 0°
Colore dell’alloggiamento lato B magenta
Tipologia di fibra G50/125 OM4
Codice colore IEC 60304
IL maximal, connettore A 0.25 dB
IL tipico, connettore A 0.15 dB
RL minimal, connector A 35 dB
RL typical, connector A 45 dB
IL maximal, connettore B 0.25 dB
IL tipico, connettore B 0.15 dB
RL minimal, connector B 35 dB
RL typical, connector B 45 dB

Documentazione